Add or Manage a Vehicle

1. On the onboarding screen, tap I have a SPARQ Device.

2. Ensure the connection requirements are met, then tap Get Started.

3. When the app finishes scanning and detects the device, tap Connect Device.

4. Enter your vehicle mileage, then tap Next.

Note: Here you can choose between miles (mi) and kilometers (km). You can change the preferred metric system later as well.

5. Choose your average daily driven miles, then tap Complete.

6. If your vehicle’s VIN is decoded incorrectly, tap Edit to update the vehicle information.

Note: If vehicle information is correct, skip to step 8 and swipe to complete vehicle onboarding.

7. Select the correct Year, Make, Model, and Trim, then tap Done.

8. Swipe to complete vehicle onboarding.

Note: This vehicle onboarding method is only available for vehicles registered in the US.

1. On the onboarding screen, tap I don't have a device.

2. Tap Change State to choose the vehicle registration state. Enter the License Plate in the text field. When done, tap Continue to proceed.

3. Enter your vehicle mileage, then tap Next.

4. Choose your average daily driven miles, then tap Complete.

5. If your vehicle’s VIN is decoded incorrectly, tap Edit to update the vehicle information.

6. Select the correct Year, Make, Model, and Trim, then tap Done.

7. Swipe to complete vehicle onboarding.

Note: This vehicle onboarding method is only available for vehicles registered in the US.

1. On the onboarding screen, tap I don't have a device.

2.Tap VIN to change the onboarding process. Enter the VIN number in the text field, or take a photo of your VIN to automatically populate the field. When finished, tap Continue to proceed.

3. Enter your vehicle mileage, then tap Next.

4. Choose your average daily driven miles, then tap Complete.

5. If your vehicle’s VIN is decoded incorrectly, tap Edit to update the vehicle information.

6. Select the correct Year, Make, Model, and Trim, then tap Done.

7. Swipe to complete vehicle onboarding.

1. Tap the garage component at the top left of the screen.

2. Tap the (+) icon to add any additional vehicles.

3. Select your preferred onboarding method.

1. Tap the garage component at the top left of the screen.

2. Swipe the vehicle to the left to reveal the vehicle menu.

3. Tap the (i) icon to open the vehicle information screen.

4. Scroll up to view all available vehicle details, such as engine size, horsepower, drivetype, and fuel type.

1. Tap the garage component at the top left of the screen.

2. Swipe the vehicle to the left to reveal the vehicle menu.

3. Tap the edit icon to open the edit vehicle section.

4. Edit vehicle details and tap on Done when finished.
Note: This method allows you to edit only the trim. To change the full YMMT (Year, Make, Model, Trim), you must delete and re-add the vehicle.

1. Tap the garage component at the top left of the screen.

2. Swipe the vehicle to the left to reveal the vehicle menu.

3. Tap the delete icon to initiate deletion.

4. Confirm vehicle deletion by tapping Yes, Continue.

​

1. Navigate to Vehicle Details screen.

2. Tap the (i) icon to access vehicle information.

3. Scroll to see all vehicle information like engine size, horsepower, drivetype or fuel type.

1. Navigate to Vehicle Details screen.

2. Tap the (i) icon to access vehicle information.

3. Tap the Edit button to enter vehicle edit mode.

4. Edit vehicle details and tap on Done when finished.
Note: This method allows you to edit only the trim. To change the full YMMT (Year, Make, Model, Trim), you must delete and re-add the vehicle.

1. Navigate to Vehicle Details screen.

2. Tap the (i) icon to access vehicle information.

3. Scroll down to the bottom of this screen.

4. Tap Remove Vehicle to initiate vehicle deletion.

5. Confirm vehicle deletion by tapping Yes, Continue.